Phone over Structured Cabling from Krone Block
Take a UK standard exchange line or analogue PBX extension delivered on a punch-down terminal block, and extend it over the structured cabling to a UK standard telephone.

The kits specified below will have a plug on the terminal block end. You will need to cut this off, and strip the wires back as shown.
N.B. The telephone company owns the wiring from the exchange to the Network Terminating Point (NTP). You are only allowed to connect to the phone company wiring at the NTP. If you have any doubts at all about doing this, and identifying the correct pairs on the terminal block, call in an expert! Neither Evonet nor Run-It-Direct can help you to identify the correct pairs, nor be held responsible if you connect to the wrong ones! |
|